Industrial Automation
-
GaIA - Gateway€0.00
Imagine a single, power, flexible and intelligent device capable of controlling, communicating and connecting your machine to the entire world.
Tecnologix GaIA (Gateway for Industrial Automation) is exactly that: a high-performance Made-in-Italy embedded controller that combines top-tier power, complete industrial connectivity, and exceptional ease of use in one compact solution.
For further information
-
GaIA Controller€0.00
TECNOLOGIX GaIA
Gateway and Industrial Automation Controller
with IoT and Fieldbus connectivityTecnologix GaIA is a multifunction Industrial Automation system, conceived to operate as a programmable I/O device and as a communication gateway to industrial fieldbuses and Cloud.
The Gateway communicates with the most popular standard fieldbuses, as
• CANopen, DeviceNet, J1939 (CAN based)
• Modbus/TCP, Profinet, Ethernet PowerLink, EtherCAT (Ethernet based)
• Modbus RTU, Profibus (RS485 based)
Ethernet, WiFi and 4G interfaces allow sharing process data with the Cloud via IoT standard
protocols such as CoAP, MQTT or LWM2M.
The User can control all the digital and analog I/O interfaces by writing their own automation procedures, directly, using C/C++ language and provided libraries, or by means of LogicLab IEC-1131 SoftPLC.For further information
-
SYS TEC CANopen Master & Slave Source Code CiA 301€0.00
Fast & standard-compliant implementation of your own CANopen devices
Inklusive NMT Master, LSS Master oder SDO Clients
The CANopen Stack Master & Slave source code contains the complete functionality according to the CiA specification 301. The CANopen source code enables a fast and standard-compliant implementation of own, fully equipped CANopen master or slave devices including NMT Master (Network Manager), LSS Master (Layer Settings Service) or SDO Clients.
A high level of performance is achieved through direct, event-oriented signaling down to the application level. The CANopen Stack Master & Slave source code is prepared for simple integration into various operating systems thanks to the corresponding functionalities. This makes porting much easier.
The comprehensive and well-structured API allows easy use of the CANopen services: You do not need to worry about the details in the implementation. The sample programs included in the package, the target-oriented demo projects and the comprehensive documentation will guide you step by step.
CAN driver porting, the implementation of specific demo projects or the adaptation of the CANopen software to processors that are not directly supported can be carried out within a few days. Please contact SYS TEC for further information regarding the available options and services.
-
SYS TEC SDO Gateway Add-on€0.00
The SDO Gateway Add-on implements a SDO gateway function, which makes possible the SDO transfer between two or more CANopen networks. To use this feature, the gateway device must feature at least two CANopen instances.
-
SYS TEC CiA 304 SRDO Add-on€0.00
The CiA 304 SRDO Add-on provides all services and functionality compliant to CiA 304 V1.0 - CANopen Framework for safety relevant communication.
-
SYS TEC CANopen CiA 402 Add-on€0.00
CANopen per azionamenti e motion control secondo CiA 402
Le applicazioni CANopen per azionamenti e motion control conformi alla specifica CiA 402 consentono il controllo di prodotti digitali per l’azionamento, come servoazionamenti, convertitori di frequenza e servomotori.
L’Add-on CANopen CiA 402 per il CANopen Stack include le routine software necessarie per implementare applicazioni CANopen per azionamenti e motion control secondo CiA 402. È utilizzato, tra gli altri, per prodotti di controllo digitale quali servo controller, frequency converter e servo motori.
Un set completo di funzioni API permette di gestire lo stato del dispositivo e il modo operativo. L’implementazione può gestire fino a 8 assi e supporta:
-
Homing Mode — ricerca della posizione di riferimento
-
Profile Position Mode — posizionamento
-
Profile Velocity Mode — controllo della velocità
-
Velocity Mode — regolazione della velocità
-
Profile Torque Mode — controllo della coppia
-
-
SYS TEC Dynamic OD Add-on€0.00
The Dynamic OD Add-on implements a Dynamic Object Dictionary as specified in CiA 302 and provides functionality to replace, extend or modify parts of an existing object dictionary at runtime (e.g. PDOs, process data). It uses a special kind of compressed binary DCF, called "Concise configuration storage".
-
SYS TEC MPDO ADD-ON€0.00
Multiplex PDO services
CANopen Add On according to CiA 301
The MPDO add-on module provides multiplex PDO services according to CiA 301. A multiplex PDO is a special PDO which is used where more process data has to be transferred than "normal" PDOs are able to transfer. MPDO's are used for example with CANopen lifts (CiA 417).
To use the Add-On Module the CANopen Master Slave Stack or CANopen Manager Stack is required.
-
SYS TEC CANOPEN FLYING MASTER ADD-ON€0.00
The extension module Flying Master renders a CANopen Manager according to CiA-Standard 302 Part 2 with the possibility to determine the NMT mode as Master or Slave dynamically to the run time.
-
SYS TEC CANopen Device Explorer Full Version€0.00
Inspection & advanced configuration of CANopen devices
CANopen DeviceExplorer is a versatile tool for development, testing, diagnostics and service tasks. The integrated CANopen master functionality allows the inspection and configuration of CANopen devices through direct access to the Object Dictionary (OD) . The necessary information about the respective device is read from the electronic data sheet of the device (EDS or XDD format) or queried directly from the device via online access. Modified device configurations can be saved and loaded using the standardized DCF files (Device Configuration Files). It is also possible to manage entire CANopen networks in project files.