Tecnologix

IXXAT Safe T100

IXXAT Safe T100

A module for quick and easy implementation of safe IOs.


• Supports PROFIsafe and CIP Safety
• Used together with Anybus CompactCom series
• Up to SIL3 or Performance Level PLe/Category 4
• TÜV certified

Richiedi informazioni per questo prodotto
Descrizione

The IXXAT Safe T100 offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in ISO 13849-1. Safe T100 is primarily designed to be used together with Anybus CompactCom, where the safety communication uses the black channel principle through Anybus CompactCom. For PROFIsafe, CompactCom performs the tasks of a PROFINET IO device, while Safe T100 includes the PROFIsafe layer and safe control of three dual-channel inputs as well as one dual-channel output. The same applies to the IXXAT Safe T100/CS, where the CompactCom takes over the EtherNet/IP Adapter functionality and the safety module implements the CIP safety layer as well as the safe control of the IOs. The module's very compact size and flexible safety I/O routing make it perfect for integration into customer specific device solutions. The IXXAT Safe T100 is currently available for PROFIsafe and CIP Safety. Support for FSoE is planned.


Black channel principle

The IXXAT Safe T100 is used in customer devices together with a communication module of the Anybus CompactCom series, which is used to implement the unsafe bus connection. Safety communications use the black channel principle through the Anybus CompactCom communication module. For PROFIsafe, for example, the communication module carries out the tasks of a PROFINET I/O device. 



Simple certification

A comprehensive safety manual is provided for device certification. This describes all the needed integration and verification steps to achieve the TÜV certification which greatly reduces the time-to-market. Especially the clear separation of safety-relevant functions from the unsafe functions of the end device by the precertified IXXAT Safe T100 plug board is a great help in this situation. 


Development kit

The Safe T100 comes with development kits for evaluation purposes. These consist of a base board with a PROFINET I/O or EtherNet/IP Anybus CompactCom module and a host CPU, along with the suitable safety module with easy to access safety I/O signals.
The configuration of the Safety I/Os is done via the fieldbus connection. For PROFIsafe a configuration tool is available which can be integrated seamlessly into the Siemens Step7 or TIA Portal tool chain. 



Sample application

Specifiche
Supported standards PROFIsafe (Standard V2.4), CIP Safety (Volume 5, V2.14)
Digital inputs 3 x dual channel, configurable with filter and monitor functions
Digital outputs 1 x dual channel, configurable
Safety Conformance Level max. SIL 3, PL e category 4
Power supply 24 V DC (SELV/PELV), 3.3 V DC
Environment temperature -30 °C to +68 °C
Dimensions 70 x 40 x 15 mm
Caratteristiche e Benefici

• All necessary functions and methods to achieve SIL-3/PLe on one board — simplifies customer board design
• IOs configurable for single and dual channel use
• Pre-certified concept and hardware for easy re-certification of the final device
• Provision of full documentation set including TÜV type approval
• Direct connectivity to Anybus CompactCom module for non-safe fieldbus communication - safe and non-safe communication on the same wire

Numeri ordine
Order code Description
1.01.0300.00001 IXXAT Safe T100/PS
1.01.0301.00001 IXXAT Safe T100/CS
022830-B T100 Development Kit for IXXAT Safe T100/PS
025800-B T100 Development Kit for IXXAT Safe T100/CS