Ixxat FRC-EP190

The FRC-EP190 comes with a variety of different automotive communication interfaces plus an optional EtherCAT slave interface. It is ideal for applications in which several bus systems are to be merged into a single device with its own processing power – e.g. for logging, gateway and residual bus simulation applications.

All applications run on the device, a PC is only needed for configuration or stimulation/visualization of data, as the actual intelligence – for e.g. the transport protocols – is outsourced to the embedded platform.

HMS provides with  Ixxat ACT (Advanced Configuration Tool) an easy to use Windows-based tool enabling customers to configure the device via drag-&-drop.



  • FlexRay option
  • Industrial Ethernet support (like EtherCAT)
  • Up to 8 CAN (FD) channels in one device
  • Only a few µs delay of frames in classical gateway applications 
  • Analog inputs
  • Up to 2 kV galvanic isolation
  • Compatible to the Ixxat CAN@net Generic Ethernet Protocol
Dimensions (L x W x H)180 x 110 x 50 mm
Protection classIP42
WeightApprox. 630 g
Operating temperature-40 °C to +80 °C
Power supply6-36 V DC
Current consumptionTyp. 420 mA at 12 V
Housing materialAluminum
Relative humidity10-95 %, non-condensing
Host systemPower PC, 256 MByte RAM, 256 MByte Flash
Ethernet10/100 MBit/s, RJ45
USB2.0 high-speed device, USB-B
2.0 high-speed device, USB-A
FlexRay communication controller2 x Freescale MFR 4310
FlexRay transceiverNXP TJA1080
CAN transceiver high-speed and CAN-FDTexas Instruments SN65HVD251
CAN-FD transceiver (1.01.0094.10022/10052/10070 devices)Microchip MCP2562FD
CAN transceiver low-speedNXP TJA1054T
CAN bus termination resistorHigh-speed/CAN-FD: none
Low-speed: RTH=RTL=2 k Ohm
CAN and FlexRay signal delay with galvanic isolationTyp. 27 ns
LIN transceiverNXP TJA1020
K-LINE transceiverVishay SI9243AEY
System startup time< 5 sec from power-on
Order numberProduct nameGalvanic
count (total) 
CAN high speed CAN low speed (C)CAN FD (B)LINEtherCAT
Analog in Digital in/out
(A) (D)
Digital in/out
(A) (E)
Ethernet 10/100
USB 2.0 device USB 2.0 hostSDHC slot Internal WiFi
1.13.0094.10107 FRC-EP190 Plus CANonly yes 882
1.13.0094.10407 FRC-EP190 Max EtherCATyes 1882
1.13.0094.10507 FRC-EP190 FlexRay Plus 4yes 1882

(A) Input or output per software switchable
(B) 6/8 CAN in total, thereoff max. 2/4 CAN-FD capable
(C) 4/6/8 CAN in total, thereoff max. 1 Low-Speed CAN capable
(D) 4 digital inputs/outputs (5 V TTL)
(E) 4 digital inputs (max. 34 V), 4 digital outputs (max. 34 V, 1 ampere)

Hai bisogno di aiuto per sviluppare il tuo progetto?

Con più di 25 anni di esperienza nei servizi di ingegneria elettronica ed informatica, affiancati da consulenza e formazione, Tecnologix è il partner ideale per lo sviluppo di ogni tipo di applicazione nel settore industriale.
Clicca il pulsante qui sotto e inviaci la tua richiesta, il nostro staff ti risponderà il prima possibile.