Richiedi informazioni per questo prodotto ➦


CAN interface series for PCI Express

With CAN (HS/LS), CAN FD and LIN support.



Active CAN FD Interface for PCI Express

1-4 x CAN FD, CAN (High-Speed), LIN

Product status: New product, available end of April

With the CAN-IB640/PCIe HMS offers a CAN FD interface based on a modern and highly modular architecture concept. The interface is available with up to four CAN channels. Each channel can send and receive either CAN FD or CAN 2.0A/B messages. In addition four LIN channels are available.


PC bus interface PCI Express base specification, Rev 1.1, single lane port (x1)
CAN transceiver MCP2562FDT-ESW
LIN transceiver MCP2003B-E/MC
LIN bus voltage -18 V to +50 V (short circuit proof)
VBATLIN 5.5 V to 30 V
Operating temperature range 0 °C to +70 °C
Storage temperature range -40 °C to +85 °C
Galvanic isolation 1 kV, 1 sec.
Relative humidity 10 % to 90 %, no condensation
CAN propagation delay With electrical isolation typically 6 ns, max. 10 ns
CAN / CAN FD bit rates CAN: 10 kbit/s to 1 Mbit/s   
CAN FD arbitration phase: up to 1 Mbit/s
CAN FD data phase: up to 8 Mbit/s
LIN bit rates Up to 20 kbit/s
Power supply Via PCIe socket (3.3 V DC)
Current consumption Typ. 500 mA
Dimensions 64 x 127 mm
Weight Approximately 69 g
  • Active board with 32 bit microcontroller
  • Up to four CAN channels (High-Speed CAN or CAN FD)
  • Four LIN channels
  • All fieldbuses accessible via two D-Sub-9 connections
  • Single Lane (x1) PCI-Express-Interface
  • Galvanic isolation of the CAN interface
  • Common driver interface support for all Ixxat CAN and CAN FD interfaces allows easy change of the PC interface type
  • Powerful programming interface for Windows "VCI" and "ECI" for Linux and VxWorks
1.01.0245.42012 CAN-IB640/PCIe PC/CAN interface board