SEGGER J-Link ULTRA+

J-Link ULTRA+ is an ultra fast debug probe for JTAG/SWD. It is 100% compatible with J-Link PLUS, just faster. Unplug your J-Link PLUS, plug in your J-Link ULTRA+ and enjoy the faster download speeds. It simply works!

J-Link Debug Probes ➦

J-Link ULTRA+ is a JTAG/SWD debug probe designed for ARM/Cortex. It is fully compatible to the standard J-Link and works with the same PC software.

Based on the highly optimized and proven J-Link, it offers even higher speed as well as target power measurement capabilities due to the faster CPU, built-in FPGA and High speed USB interface.

 

 

SEGGER J-Link Flash Breakpoint Introduction

SEGGER J-Flash Introduction

SpecificationValue
Supported OSMicrosoft Windows 2000, XP, 2003, Vista, 7 and newer (32 bit and 64 bit versions)
Linux 
macOS 10.5 and higher
Electromagnetic compatibility (EMC)EN 55022, EN 55024
Operating temperature+5°C ... +60°C
Storage temperature-20°C ... +65 °C
Relative humidity (non-condensing)Max. 90% rH
Mechanical
Size (without cables)100mm x 53mm x 27mm
Weight (without cables)73g
Available Interfaces
USB interfaceUSB 2.0, (Hi-Speed)
Target interfaceJTAG/SWD 20-pin
JTAG/SWD Interface, Electrical
Target interface voltage (VIF)1.2V ... 5V
Current drawn from target voltage sense pin (VTRef)< 25µA
Target supply voltage5V (derived from USB voltage)
Target supply currentMax. 300mA
Reset typeOpen drain. Can be pulled low or tristated
Reset low level output voltageVOL <= 10% of VIF
For the whole target voltage range (1.2V <= VIF <= 5V)
LOW level input voltage (VIL)VIL <= 40% of VIF
HIGH level input voltage (VIH)VIH >= 60% of VIF
For 1.2V >= VIF <= 3.6V
LOW level output voltage (VOL) with a load of 10 kOhmVOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhmVOH >= 80% of VIF
For 3.6 <= VIF <= 5V
LOW level output voltage (VOL) with a load of 10 kOhmVOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhmVOH >= 80% of VIF
JTAG/SWD Interface, Timing
Target interface speedMax. 50 MHz
SWO sampling frequencyMax. 100 MHz
Data input rise time (Trdi)Trdi <= 20ns
Data input fall time (Tfdi)Tfdi <= 20ns
Data output rise time (Trdo)Trdo <= 10ns
Data output fall time (Tfdo)Tfdo <= 10ns
Clock rise time (Trc)Trc <= 3ns
Clock fall time (Tfc)Trc <= 3ns
Analog power measurement interface
Sampling frequency200 kHz
Resolution50 uA
  • Download speed up to 3 MByte/s
  • Additional LEDs for power and RESET indication
  • 2 years of email support (J-Link BASE/PLUS: 1 year)
  • Superset of J-Link PLUS [More..]
  • Comes with integrated licenses for: Unlimited breakpoints in flash memory (Unlimited Flash Breakpoints), RDI / RDDI and J-Flash
  • Supports a broad range of microcontrollers: [More..]
  • Supports direct download into RAM and flash memory
  • Multiple CPUs supported—8051, PIC32, RX, ARM7/9/11, Cortex-M/R/A, RISC-V [More..]
  • Free software updates
  • Built-in VCOM functionality [More..]

Tecnologix offers support which is directly handled by development team. Do not hesitate to get in touch with our experts.
Just ask here

Technical Support

Tecnologix offers support which is directly handled by development team. Do not hesitate to get in touch with our experts.

Just ask here