Systec CANopen IO-X3, 24DO

Compact & cost effective CANopen remote I/O module

Extensive diagnostic functions ensure reliable & safe operation

The CANopen IO-X3 is a very compact and cost effective CANopen IO module featuring a high-density of industrial proven IO's.

The module includes a CPU-core including the pre-programmed firmware for CANopen communication and peripherals for the industrial inputs and outputs. Extensive diagnostic routines are implemented to ensure a most reliable and safe operation.

All inputs and outputs as well as configuration parameters are accessible via the CANopen protocol.

The CANopen IO-X3 is a CANopen slave device according CANopen device profile CiA 401 V2.1 and CANopen communication profile CiA 301 V4.02.

Two LED indicate the device state according to CiA 303-3 V1.0.

Physical 

Size (LxWxH)

95x70x58mm

Operating Temperature-20 to +70°C
Storage Temperature

-20 to +90°C

Humidity10 to 95% non-condensing (VDE 0110)
Weightca. 130g

Installation Method

DIN-rail mounting

Enclosure Protection ClassIP20

Power Supply

 

Operating Voltage

24V ± 20%

Current Consumption< 70mA
I/O Interfaces 

Digital Inputs 24 VDC, 500mA

24 (short circuit protected)

Visualisation 
Status LEDsPower
 Error
 Modul status
 I/O Status
 and others
Particularities 

CAN/CANopen

CANopen device according to CiA 401 V2.1

 

Galvanic isolated CAN bus interface

 

CAN bus termination (120 Ohm resistor) via Jumper

Others

Non-volatile storage of configuration data

 

Watchdog

 

Separated power supply pin for supply of digital output groups

• Communication profile according to CiA 301 V4.02
• Device profile according to CiA 401 V1.2
• State indicators according to CiA 303-3 V1.0
• Layer Setting Service (LSS) according to CiA 305 V1.1
• 2 RPDO
• Dynamic PDO-Linking and Mapping
• SDO-Server
• Life guarding, Node guarding, Heartbeat Producer
• 5 Heartbeat Consumers
• Emergency Producer
• Minimum Boot-up capability (Slave)
• Minimum NMT boot-up master (Manufacturer extension)

Communication and device configuration:

• Galvanic decoupled CAN-bus driver supports up to 110 CAN-nodes on one bus
• Jumper for CAN-bus termination 120Ohm
• Hex-encoding switches for setting node-ID and baud rate
• CAN-bus baud rate: 10kBit/s to 1Mbit/s
• High-quality connectors: (included in scope of delivery)

  • Power-Supply: 2-pin plug connector
  • CAN-bus: 5-pin plug connector
  • I/O: single 30-pin plug connector, lockable

• Internal monitoring and diagnostics of: onboard temperature, power supply, memory and other controller internals
• Emergency Messages sent out in case of failure

P / NDescription

3001002

CANopen IO-X3, Standard version
Digital outputs: 24 channels, 24VDC / 500mA, high side switches with short circuit protection

Tecnologix offers support which is directly handled by development team. Do not hesitate to get in touch with our experts.
Just ask here

Technical Support

Tecnologix offers support which is directly handled by development team. Do not hesitate to get in touch with our experts.

Just ask here